Construction method of decorative mesh for exterior wall cladding

Fecha:2021-05-27Golpea:791

Construction method of decorative mesh for exterior wall cladding

In the construction process of decorative mesh for exterior wall cladding, firstly, remove the dust on the wall and the loose ash joint mortar. The cement mortar will make the uneven part flat. After leveling the wall, asphalt felt is laid to ensure the adhesion of decorative mesh for exterior wall cladding. Secondly, the installation of decorative mesh for exterior wall cladding wooden keel adopts 40 × 40 wooden keel, fixed on the base with expansion screws, and the vertical and horizontal spacing is controlled at about 600. The thickness of gypsum board is 1200mm, and then M4 is used for gypsum board × 35 wood screws. At the edge of wood, screw spacing should be controlled at about 300. Finally, lay the glass fiber layer, and then use 4 × 20 wide aluminum mesh and screws are used to fix it on the decorative mesh for exterior wall cladding. After installation, check whether the decorative aluminum mesh is loose.

Because the metal materials used in decorative mesh for exterior wall cladding are unique and easy to maintain, so decorative mesh for exterior wall cladding has been widely used. The decorative mesh for exterior wall cladding can be used for architectural decoration, museum, hotel, office building, store and ceiling decoration. The decorative mesh for exterior wall cladding can also be used for workshops, hotels, railway station waiting rooms, platforms, large conference halls, government agencies, stadiums, airports and other places.

leave your message